Tent Light / Camping Lantern

A small camping lantern made to hang in your tent. This is made to fit any battery powered tealight candles under 40mm wide. The base has a print in place hook to hang in your tent or to string up a few around your campsite. The hook also folds flat so you can set them on the table. 

Print the base flat (hook) side down with support to only the build plate. You should be able to print the bulb with no support, thread side down round side up. It is very thin though so depending on the printer you may need support in the centre. After printing you may need to pop open the hook the first time but after that it should open and close easily. 

Once printed place a battery powered tealight candle inside and screw the two halves together. 
 

Updates:
Sept. 4, 2024: Updated Tent Light Bulb with slightly thicker shell for more consistent printing.