BentoBox net-infill x4
Insert for the activated carbon container in the BentoBox.
10
182
0
421
updated September 2, 2024
Description
PDFIt is recommended to print the part in ABS/ASA or PETG or similar temperature-insensitive materials.
I use it in the Creality K1 Max and since I have installed a build space heater, temperatures of up to 60°C can occur.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
After printing the net infill, I only had completely closed inserts. Since that was pointless and I didn't feel like drilling, I simply created a honeycomb net infill with Fusion 360.
I have designed a finer mesh version, as there is also quite fine activated carbon. This version can hold +2.5mm grain activated carbon.
It is printed in ABS Black with the following settings:
Nozzle 0.2/ Layer height 0.08mm /High quality.
