Fishing Lure and Tackle Boxes

An assortment of different lure and tackle boxes. The box is  approx 200x140x44 mm  and comes in configurations of 3, 4, 6, 8, 12 compartments. All boxes shares the same lid and lock.

For assembly you need two 28mm long M3 bolts for the hinges and one 43mm long M3 bolt for the lock.

I printed my boxes with clear PETG (Add-North) and the lock in blue PTU (95). PLA should work just fine for all parts. The lock comes in a loose and a tight version, test which one works best for you. After assembly you need to carefully break-in the hinges and lock.

I printed all parts with 0.2 height and 35% infill.