Broom Stick Holder

V9 – I moved the screw holes to be 1 in on center so you can screw it to a peg board if you so desire. 

V10 – I got to print it finally and my measurements were way to large… I have reduced them. 
I'll print to night to double check. but V10 is the version you want, sorry for the inconvenience. 

P.S. – to increase the springiness, I've sliced it with 4 perimeters, no top and bottom layers, no infill except to support the screw holes. (see ‘BroomHolder v10.3mf’)

Printed and tested! this bad boy works, for reference that is a ¾" broom handle. 
works well. very springy. I'll be mounting it to the wall soon.

****Edit

I've added an stl of a hollowed version. this way you do not need to rely on the slicer to do the hollowing if you do not want to.