hexagon threaded tube container
The model was made with my OpenSCAD based HT²C generator.
The model can and should be printed with in vase mode.
You can print the model in layer mode but vase mode will be much faster and for this very special design stronger than a layer mode one-
The thread structure gives this model a lot of strength. I made bigger containers that hold kilograms of weight.
Best filament for this model is PETG.
The print shown here was made with extrudr PLA Basic transparent,
Wallsize 1.2mm, Layerheight 0.3 mm and nozzle wide 0.6mm on a Prusa MK3s+
You find the settings in the Prusaslicer 3mf file
To make your own version with the diameter and height of your choice you can use this online tool for free without any installations:
https://makerworld.com/en/models/615408#profileId-538805
Just click the customize button and make your own size.
You can also download the OpenSCAD source code und use your local OpenSCAD installation.
The author marked this model as their own original creation.