Lenovo Legion Go Stand

I couldn't find a nice dock or stand that used or allowed access to the bottom USB C port, and it looks ugly with the cable hanging out of the top of the device. For use with a USB C cable with the connector angled 90 degrees in the same orientation as the image.

I printed it in PLA+ with 15% infill, 0.16mm layer height and it came out well. Supports are needed. It's a fairly snug fit as I wanted it to be because I rarely move the device. If you will be removing the device from the stand on a regular basis, you might want to scale the model up by 1% or so in your slicer.

If you like the model, a make is appreciated.