Hoplomachus Victorum Magnetic Chip Reminders

A set of Tactic, Arena and Bane effect reminders for Hoplomachus Victorum that magnetically attach to the top of units.
1
3
0
38
updated August 30, 2024

Description

PDF

Inspired by the Hoplomachus: Mag Tokens currently for sale in the Pandora's Box campaign seen here:

https://gamefound.com/en/projects/chip-theory-games/hoplomachus-pandora-expansions--base-game-reprints#/product/44517

I decided to try and make my own.. This is my first 3D project so I wouldn't say they're perfect but I am happy with them. Some of the detail does get lost in printing but i made them small by design, on my printer (sovol sv07) I lost the teeth and the 1 and 2 off the bane tokens, your mileage may vary

As seen in picture 5 there is a slot for a 5x2mm neodymium magnet to pushed in, I made the fit very tight as I wanted them to push in and not need to be glued as to not risk glue burning your chips.. Some go in by hand, the other ones I found that if you lay the magnet on your neoprene mat and then put the token on top of the magnet and push down hard they will click in.. If you ever want to retrieve your magnets you can just use a pair of kitchen scissors on the side of the token and they'll pop out, just watch where they go cos i have found they travel some distance

I am quite new to Hoplomachus so I may have missed some, there are some on the gamefound campaign I do not recognise.

Some of the files are named x3 that is because there are 3 chips with that effect and so you might want to print 3 of those.

On 0.2 layer height, printing on cura, I needed to do a filament change at layer 57
 

No supports needed

I used no brim, I just sprayed my plate with hairspray and only one of them failed

Model origin

The author marked this model as their own original creation.

License