Simhub Dashboard Alfa Romeo 159 inspired

DISCLAIMER: I haven't built this yet. Sizes will depend on your own components and tolerances on your printer. Modify this design to suit your needs. I designed it with gluing in mind. If you want to use screws, you will have to modify the Fusion 360 file. I am also using @istevene_241448 's design for the Nano mount. If you have any suggestions or questions DM me.

FUNCTIONALITY

• The left part is the RPM gauge. There is no gauge, of course, but there is a RGB led ring instead. In the center there is absolutely nothing, maybe you can put a vynil there, for example. In the middle, there is a LED matrix that serves as a gear indicator, flag indicator, spotter, etc. On the right we have the spedometer, which works the same way as the RPM gauge just it indicates the speed instead. There is also a 7 segment display in the centre to indicate the speed as well.

COMPONENTS

• Arduino Nano (if you use something else you will have to change the mount)
• 2x WS2812b 24 LED rings
• TM1637 0.56 inch 7 segment diplay (clock version does not work)
• WS2812b 8x8 LED matrix

SUPPLIES

• 3mm tinted acryllic sheet (200x200mm)
• Carbon fiber wrap (recommended)
• Aluminum colored spray paint (recommended, will depend on your filament)