Illusion Pass-through Illusion

This is a mind blowing concept that is extremely mesmerizing and will amaze your friend and family

Instructions:

1. Slide the Drive Gear through the designated hole in the base
2. Slot the Crank over the Drive gear. Glue in place if needed
3. Screw the Axle to the the base and tighten it with pliers
4. Place the Big Gear on the Axle and make sure the gears interlock
5. Put the Cut out on the Axle and make sure it is secure. Use glue if needed
6. Finally slot the Pole into the big gear.

To make a pattern in the cut out simply make there be no bottom or top layers and chose your desired pattern