Double Pulley

I created my own Double Pulley, to everyone, who needs a light duty pulley for various reasons. I will use it to working with paracord and for capmping purposes.

DONT USE FOR CLIMBING!

If print two of these pulleys and puts to work together and achieve an impressive 1:4 mechanical advantage.

Light duty - 10 kg successfully tested (i have only two 5KG weghts) with 25% infill

Dimensions - 81,26mm x 66,12mm x 24,12mm

Required hardware only 2x threaded screw with countersunk head M4x30

Printing:
For my purposes of working with paracords i used 25% infill, but to maximize strength increase the number of perimeters or use a 100% infill. 

Also if You need some different sizes, You can take my model and resize them as you need :-)

Printing moving parts in one piece. Remove the supports thoroughly!

Print settings

Printer Brand:
Prusa

Printers:
i3 MK3S+

Rafts:
No

Supports:
Yes

Distinction:
0.20

Filling:
25 % +

Thread Brand:
Prusa

Thread color:
You can use Your favorite colour

Fiber material:
PETG