Hulk face movie Hueforge

Project: Hulk face.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 120x240mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.3
    PLA R3D Green Fluorecent Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to  Green
    At layer #18 (1.52mm) swap to Yellow
    At layer #21 (1.76mm) swap to White for the rest.