Makita Cordless 6-1/2 in. Circular Saw 18V (XSH04ZB) - Wall Mount

A sturdy tool holder for quick access to your Makita 6-1/2 in. cordless circular saw. Fit is snug, however, the blade DOES NOT need to be removed (blade guard retracted). Can be wall mounted directly with 4 flathead screws. I chose to attach mine to a French Cleat (with backing for additional support & stability against the wall).

NOTE: This holder was designed specifically to fit Makita - Model XSH04ZB. It might fit other makes or models as well. Please check your saw dimensions prior to printing… it's about 11.5 hrs print time (on my printer) with the settings used.

*Printed on AnkerMake M5C (0.4 mm nozzle - 220x220 mm bed).

*File should be printed in the orientation shown. I only used supports on the holes, just to keep them clean. 

Suggested Print Settings:

Layer Height:  0.16

Perimeters:  3

Fill Density:  15%

Fill Pattern:  Grid

Filament:  PLA

Rafts:  No

Brim:  Recommended (Outer & Inner)

Supports:  Inside the mounting holes (optional) . I used paint-on supports.