20mm Bit Holder (LTT Bit Storage) Square with Magnets (Parametric)

Square 20mm (LTT) Bit Holder

UPDATE: Added Parametric Fusion files for any number of rows/columns! Logo can also be enabled/disabled via parameters. 

A square, lower volume version of the original.. with magnets!

Had 1 too many instances where a few, or all, of the bits would fall out in my bag. 1 magnet is more than enough to hold the bits in, even when being shaken upside-down. Use 6x2mm magnets. Only 1 magnet is needed, but I've included models for 0-2 magnets. (All versions in the .blend file as well)

I recommend alternating polarity when laying out the magnets, so 2 cases can be attached to one another. Cause why not \_(ツ)_/.

Example magnet layout (make sure all holders match): 
🟢🔴🟢🔴🟢🔴🟢🔴🟢🔴🟢🔴 
🔴🟢🔴🟢🔴🟢🔴🟢🔴🟢🔴🟢

Includes versions with the names of the bits sold by LTT engraved in the top and sides of the outer shell.

A template version can also be found in the .blend file if you're familiar with blender. Just edit the Text using tab, convert to mesh, boolean difference, done.

Print Settings

Supports:

No

Notes: 

Print outer shell standing upright for best results for the logo.

All models should be loaded in correct printing orientation.

Category: Tool Holders & Boxes

Completely redid the profile of the original, but kept bit spacing, and rail system for base and shell to slot together. 

• Switched to square shape to reduce overall profile.
• Added magnet inlays so bits don't fall out if the shell falls off. Also lets you slap it on metallic surfaces.
• Added numerous models with “engraved” labels for the various bit sets as sold by LTT.
• Added small tabs to shell to try and help keep shell on better (not super thought out, doesn't really work).