Rigol Oscilloscope Cover

A travel cover for Rigol DHO8xx series of oscilloscopes.  Designed-in support allow printing on any printer with a build volume ≥ 250mm x 250mm x 210mm, i.e. MK3S, Bambu X1C, P1S, etc.  
 

Many thanks to Slant 3D for the support tip that enabled printing within my small build volume.  Here's the link to his tip: Slant 3D Correct Orientation to Print Boxes.  The supports tips that contact the model are .4mm x .4mm to minimize the artifact after breaking off the support.

Printing

• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Perimeters: 3
• Infill: 15% Rectilinear
• Filament: PLA or PETG
• Optional: Enable fuzzy skin for textured surface.