Stanley Organizer - 25 different sizes

I use a lot of these organizers vom Stanley for my screws and electronic stuff. But I was never happy with the ammount/size of the bins.

So I set myself to work to make a good variety of different sizes.
All bins have a 2mm bottom and 2mm walls.
The bottom is 1mm smaller in all directions.
Height is 42mm and therefore a little bit taller than the originals, to prevent washers from jumping to other bins. Still, I would not recommend carrying the organizers with the handle if you got small parts in it.

On the picture you can see some numbering examples for the sizes.
First nummer is X. Second number is Y.

+--------->X
I
I
vY

Availabel sizes are:
1x1, 1x2, 1x3, 1x4
2x0.5, 2x1, 2x2, 2x3, 2x4
3x0.5, 3x1, 3x2, 3x3, 3x4
4x0.5, 4x1, 4x2, 4x3
5x0.5, 5x1, 5x2, 5x3
6x0.5, 6x1, 6x2

Theoretically, you should be able to print the 6x on a Prusa i3 since it is 239mm long.
Make sure you really have this freedom in X-axis.
I didn't test all sizes (especially the big ones).

If you miss a size, just contact me.

14.03.2023
Added the following sizes on user-request
7x0.5, 7x1, 7x2
8x0.5, 8x1, 8x2
9x0.5, 9x1, 9x2
10x0.5, 10x1, 10x2

Print Settings

Printer Brand:

Prusa

Printer: 

i3 MK2.5

Rafts:

No

Supports: 

No

Notes:

I printed mine with PET-G, 2 walls and 3 top/bottom layers with 20% infill.

Category: DIY