Starlink mini Netzteil 12-48V mit Step-up Booster für original 15m Kabel / Power Supply for 12V and 15m cable

Ein Gehäuse zum Selbstbau eines 12V Netzteils für die Starlink mini
20
329
1
2206
updated September 10, 2024

Description

PDF

(English below)

Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt zu keinen Störungen durch Spannungsabfall. 

Alle Teile die Du für den Nachbau brauchst findest du hier: 
➡ DC5521 Buchsen - https://amzn.to/3XjgLtP 
➡ Step-Up Booster 12→48V - https://amzn.to/4dVcQsG 
➡ 12V Stecker - https://amzn.to/4754zjH
➡ 2,5mm2 Kabel - https://amzn.to/4cGuNdA

Was noch fehlt: Schrauben, M3 10-12mm Z.b. https://amzn.to/3MobHOy

EDIT 10.09.2024:
Ich habe die Variante um einen XT60 Stecker erweitert. Somit kann ein Handelsübliches 12V KFZ auf XT60 verwendet werden. 

KFZ auf XT60 Kabel - https://amzn.to/47n80mb
XT60 Buchse - https://amzn.to/4gjQVNJ

Ich empfehle hitzebeständiges Material zu nehmen, zum Beispiel ASA. Der Booster ist bei mir bisher noch nicht sonderlich warm geworden, aber ich habe ihn auch noch nicht lang genug getestet. 

 

-------- English ---------

In order to be able to operate the Starlink mini in my motorhome with 12V, I built a small 12V power supply for the car cigarette lighter. This means that the original 15m Starlink cable can still be used and there are no disruptions due to voltage drops.

You can find all the parts you need for the replica here: 
➡ DC5521 sockets - https://amzn.to/3XjgLtP 
➡ Step-Up Booster 12→48V - https://amzn.to/4dVcQsG 
➡ 12V plug - https://amzn.to/4754zjH
➡ 2.5mm2 cable - https://amzn.to/4cGuNdA

What's still missing: screws, M3 10-12mm e.g. https://amzn.to/3MobHOy

EDIT 09/10/2024:
I have expanded the variant to include an XT60 connector. This means that a standard 12V car can be used on the XT60.

Car to XT60 cable - https://amzn.to/47n80mb
XT60 socket - https://amzn.to/4gjQVNJ

I recommend using heat-resistant material, for example ASA. The booster hasn't gotten particularly warm for me yet, but I haven't tested it long enough either.

Tags



Model origin

The author marked this model as their own original creation.

License