Multiconnect - Honeycomb storage wall (HSW) connector

Use multiconnect to attach things to your honeycomb storage wall.
71
344
2
2289
updated August 31, 2024

Description

PDF

Generic connectors to hang your bins/shelves or anything else to your honeycomb storage wall. The connector is pretty generic and allows you to attach anything you want.

Why use this connector: The connector is universally usable and allows for fast and easy installation and removal of anything you want while still being pretty sturdy. Also the connector will be invisible when something is attached, which leads to a nicer overall look.

About the connector system: The connector design/dimensions are actually pretty simple. You can look into the provided dimension PDF to create your own models using the same connector. There are also STEP files which includes just the connector head and a bin/shelve back to be used for your own creations. Feel free to just use those.

Howto use: As the connector is pretty generic I also added a version to snap fit or push fit to your honeycomb storage wall. Note however that this will not be compatible the the backs of most bins/shelves - at least for everything using more than two connectors side by side. I still think this will be useful for simpler models. Also nothing is stopping anyone from creating models matching the honeycomb dimensions of 40.88mm. See below for howto use the connector for your own models.

Printing instructions: All connectors are provided in the orientation they should be printed. Use at least 3 perimeters and I suggest at least 20% infill. I'm using the grid infill pattern, but others might just be fine. Please don't print in “superfast” mode, use “STRUCTURAL” for Prusa printers for example.

Howto use for your own models: If you like the connector you can easily create your own models based on the connector system. All you need is the back to be placed on your model. See multiconnect modeling files here on printables. This also includes negative/cutout version of the connector back, you can just apply to any existing model.

If you want to create your own connectors you may also use the provided STEP files. Those just include the head.

Please upload your model using the “multiconnect” tag, so they are easily visible to others. Also this page links to this tag on printables and thangs - so you might just get some extra views by using this tag.

Credits to @RostaP for creating the honeycomb storage wall.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Use as basis for connector mount.

License