STAR DEATH hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x140.92mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Steel Grey Transmission Distance: 1
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
This print uses 4 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White
At layer #14 (1.2mm) swap to Steel Grey
At layer #16 (1.36mm) swap to BambuLab Green for the rest.