Def Lepard hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.06x150.06mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Generic Recicled Gris oscuro Transmission Distance: 2
PLA Generic Recicled White Transmission Distance: 5
PLA Generic Recicled Rojo Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
This print uses 5 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gris oscuro
At layer #8 (0.72mm) swap to White
At layer #12 (1.04mm) swap to Rojo
At layer #17 (1.44mm) swap to Orange for the rest.