Slipcase for Supernote Nomad

The Supernote Nomad is a fantastic eInk device, but it's a little fragile if you're tossing it in your bag. This rigid slipcase may help protect the device from crushing and twisting that might damage the delicate screen.

The case was designed to fit fairly snuggly if you're using the official magnetic folio to prevent the device from slipping out. I would not recommend using this if you don't have something protecting the screen from scratches. 

The “pen well” fits the push-up standard pen; I haven't tried any others.

The case can be scaled up or down to fit your specific needs… I'd recommend printing a few centimeters to do a “test fit” before you print the whole thing. 

It's designed to be printed standing on its base; a brim might be necessary. For maximum rigidity, I would recommend printing with a 0.6mm nozzle and increasing your perimeters and top and bottom solid layers until there is no infill.

Please note: there is no guarantee or warranty, expressed or implied, that this slipcase will protect your device from damage.