Hulk Face

Project: Hulk Face.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Rosa Black Transmission Distance: 0.3
PLA R3D Green Fluorescent Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to BambuLab Green
At layer #16 (1.36mm) swap to Yellow
At layer #22 (1.84mm) swap to White
At layer #28 swap to black for the rest.