ADHDv3 PVC Pipe Project Box Mount

(I'll get a real description in here shortly)

Print four supports, they are used to provide a flat surface inside the pipe for the washers and nuts.

Parts needed:

• Interface to pipe (choose one type)
  • For normal support nuts: 4x #10-32 x 1" [M5x25] bolts
    • with two normal washers, a lock washer, and a nut each
  • For Tee support nuts: 4x #10-32 x ¾" [M5x20] bolts
    • with one lock and normal washer  and a #10-32 x 5/16" tee-nut each
    • You'll want to fix the tee-nut into the printed “T” support before you attach it inside the pipe (see photos).
•  Interface to project box
  • 4x #8 x ½" [M4x15] bolt (with one washer each)

Drill a ¼" [6mm] hole in the pipe and project box at the mounting locations for best fit.  Use a rotary tool of your choice to cut out the holes in the PVC pipe and project box.

Updates:
2024-08-26

• Added version numbers to new parts
• Moved old parts to a folder
• Introduced a tee-nut interface support option (Tee v1)
• Updated the standard nut support to be thinner (Nut v3)