Wet PETG chrismas ornaments

When you print these the way is described below, you wil get a amazing print with wet PETG that only takes 30 min or less!!

Printed with WET PETG with a 0.6 mm nozzle and 75% fan speed. You need to print it in vase-mode and you need a 3mm brim. If you want to put a light in it you doesn't need any bottem layers. The temps are going to differ on your filament, but you need to print it a bit hotter than normal to make it look better. I recoment to use translusent filament, but no translusent should also work. 

When the print is done, use a LED tea light or something like that and see it shine. (DO NOT USE A REAL TEA LIGHT ONLY THE LED TYPE) 

*  For the star you need 5 times the point and 1 middel