MicroRAP 100 Alternate Hotend Mount

This is a redesigned hot end mount for the MicroRAP 100 that's loosely based on the Prusa i3 extruder. It uses the much more common 5015 blower fan as a part cooler, and a 3010 fan (which normally comes with E3D V6 clones) to cool the hotend.

I have also included the step file for these parts for anyone who would like to make changes.

Required hardware:

• 6x M3x16mm screws
• 2x M3x30mm screws
• 1x M3x8mm screw
• 5x M3 Nuts
• 2x M4x25mm screws
• 2x M4 nuts
• E3D v6 Hot End
• 5015 12V Blower Fan

• 3010 12V Hot End Cooler Fan NOTES:
  For the part "nozzle_fan.stl" be sure that the thin walls option is enabled in your slicer.

  Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2.5

No

Supports:

No

0.2