Dynamic Duo Brick MegaFigures (5:1 Scale)

This is a set of blocks that can be used to recreate the Batman and Robin figures that were part of the Batcave set from 2012 at 500% scale.  We've included stl files to create both figures along with some of the different accessories that came with the original set. 

The stl files for the parts have all been organized into folders to make them easier to find. 

For those with Bambu printers, there are several Bambu project files located in the “Bambu Projects” folder to simplify things even further.  These files contains the parts in an ideal orientation for printing.  Parts that need painting have been painted in these files as well.  Note that you will need BambuStudio to open or work with these.

The mini-figs were remixed from the Brick Megafigure published by Julia Ebert.  The changes made to the original design are:

• All parts were scaled down 50% to work with other models we've published at a 5:1 scale from original parts
• A modified torso which includes cavities to hold the torso sticker parts provided with this design (the sticker parts will need to be glued in place at these locations).
• The waist parts were modified slightly to make them easier to assemble.
• At 50% scale, the pins were difficult to work with (and really not needed) so these were removed from the print list (Glue was still used to attach the connectors to their respective parts)
• Modified the hands to print with their connectors attached (This will require supports but eliminates the need to glue these pieces).

The basic instructions for assembling the figure can be found in Julia's post. This is a fantastic model that's easy to print and assemble.  Special thanks to Julia for sharing this work!

Note: The original versions of these figures were published with artwork on the front and back sides of the torso.  We've created sticker parts for the front and back to mirror the original artwork and included a modified torso part with cavities on the front and back to be able to accommodate the sticker parts on both sides.  This can be seen in some of the pictures shared with this post. 

All of the accessory parts were taken from thal72's Printables profile (or provided by thall72 directly) and scaled to 500%. He has a massive library of brick parts available at this location.  If you wish to do any additional customization to these figures, this is a fantastic resource to find additional parts.  Special thanks to him as well for sharing this work!

If you decide to print this, we'd love to see it.  Please post pics of your makes, and please consider liking this design by clicking the "like" link above.

Happy Building!!

• Scaled all figure parts down by 50%. 
• Modified torso to allow for decorative inserts.  
• Modified waist and hand parts to make it easier to assemble at this scale.  
• A subset of the models published by thall72 were organized and scaled up to work with the modified minifigure model.