Lamp Canopy / Lamp Ceiling Mount Plate
Quickly designed ceiling mount plate. 15x15cm
0.2mm layer height
2 walls
no supports
7
11
0
154
updated August 25, 2024
Description
PDFHey!
I made this quick model because we have a massive hole where the wires come out and another mount i tried was simply too small and would not have covered the hole. It's my first model i ever did in Fusion 360 so i will definetly do a v2 where the screw holes will be actual screw holes and better photos. Hole in the middle is 20mm in diameter.
The nut and the screw i reused from a model from Printables. These will hold the wire from the lamp nicely in place.
Mounted with 4 dowels and 4 screws!
Printed with:
0.2mm layer height
25% infill
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
reused the nut and screw from moWerk's design!