New End for Ettore Rea-c-h Squeegee and Paint Extension Pole

New thread and / or taper for pole. Also included make your own hole versions
2
23
1
86
updated August 25, 2024

Description

PDF

I had the Ettore Extension pole with the threads broken off the end of the taper… so I made a new one.

I cut the original off by slicing the plastic on two sides and pushing it off.  I probably did not need to do that as there was no effective glue holding it.  You could see some glue residue.

The new one is a snug fit so I tapped it on with a rubber mallet.   We will see how it does.

There are several option to choose from:

  1. Same Same replacement
  2. A thread only option for people that don't use the taper (in 24mm and 34mm length thread)
  3. All of the above with NO hole in the bottom so you can add your own for a different ole
  4. The taper/thread version with a pole thread socket on the bottom… in case you need the taper.
  5. A set of threads to cut socket into something

I have only printed it in PETG, no supports required when printed upright.

Tags



Model origin

The author marked this model as their own original creation.

License