MTG Card Wave Deck Box

This is an easy to print and strong deck box that fits 100+ sleeved cards. Made for Magic The Gathering commander decks but these could easily be used for anything else. Print each half in different colours to mix and match designs. 

The lids click into place and a full deck box can be held upside down without coming apart or cards rattling around inside. They are easiest to open by gently pulling apart one side and then opening all the way. 

Print each half flat side (top or bottom) down and no supports are needed. Examples in the picture are printed with a variety of filaments with a 0.2mm layer height. 


If you like this model, consider buying me a coffee: https://coff.ee/iansmithbuilds