1/12 figure eyeglasses
Eyeglasses for 1/12 scale figurines (30MS, MMS, megami device...)
23
112
0
1004
updated
August 25, 2024
Description
PDFPRINT AT 0.12MM HEIGHT
Designed to fit 30MS figurines, but should fit most 1/12 scale ones. 15mm width
I printed them on a stock Ender 3, 0.12mm height basic Cura 5.0.0 settings. In the slicer, make sure they are placed with the completely flat face onto the bed (see image)!!!!! 
After printing carefully fold them. Take care as these are fragile.
Tags
Model origin
The author marked this model as their own original creation.