Creality K1 Max Side Braces

I made these braces to strengthen the frame in the K1 Max 3D printer.

From my previous versions I found out the panel likes to rattle against the printed part in the areas between the screws. You will need 1mm foam tape to prevent the panel rattling on the plastic (pictured)

Needed:

• M3x4x5 Heat Inserts
• M3x12mm BHCS Screws
• M3x20mm Screws
• 1mm thick foam tape

If you like my work consider buying me a ko-fi ☕😊 Your support is greatly appreciated.

Last Updated: Aug 23, 2024

github