Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Red
At layer #19 (1.6mm) swap to Lemon Yellow
At layer #24 (2mm) swap to Marine Blue
At layer #28 (2.32mm) swap to Jade White for the rest.
The author marked this model as their own original creation.