This is my second clock design, but it's my first working and fully printable design.
It uses a system of cycloidal drives to reduce the input from seconds to minutes and then to hours.
Assembling this is surprisingly simple,
Always start from the back of the clock and work toward the front.
Follow the image for directions on assembly
All parts need to be printed on a high-quality printer as the tolerances are very tight to make it work well.
you will need to print one of each file but 2 small gears are needed, and 10 bolts or 10 purchased ¼-20 bolts
The author marked this model as their own original creation.