Wasp & giant hornet trap for PET bottles with any size cap.

This wasp trap is made up of a perforated cone fixed to the original cap (any type of pet bottle cap) without having to design one for each type of thread on the market.

Model 1:
After printing the cone, pierce the original cap, making a hole of about 12 mm (cutting with scissors, even if irregular, will fit perfectly). A groove has been made in the cone into which the cap will be inserted.

There are holes at the top for hanging the entire trap using a thin rope. A small umbrella (recycling a small PET bottle) was attached to the same rope to protect the trap from the rain.

Model 2:
This model was created with an integrated protective umbrella and also has a quicker cap attachment system. 
printing time 60 minutes.

After printing the cone, create a cross-shaped cut with a knife, even if uneven, it will fit perfectly). A groove has been made in the cone into which the cap will be inserted.

There are holes at the top for hanging the entire trap using a thin rope.

Useful camping accessory, space-saving that allows you to reuse any bottle with a PET cap.

Print Settings:

Printer Creality Ender 3

Supports: No

Resolution: 0,3

Infill: 20%

Filament: Prusa PETG

Printing time: 1° Model 38 minutes

                               2° Model 60 minutes.

The bait for wasps and hornets is usually a sweet and sour substance that can be prepared at home, for example by mixing water, vinegar and sugar, a simple mixture that recalls the flavor of ripe fruit. Another very effective food bait suitable for the Tap Trap wasp trap is simple beer.