Mortarboard / Doktorhut

Mortarboard

Additional materials:

• 4x M2x20 bolts
• 1x M5 heatset inset
• 1x M5 bolt for mount of decoration and tassel
• Rope for the tassel
• Any kind of decoration

Printing

• Open the Freecad file and change the “circle_inner_diameter” in the Spreadsheet according to the head size of the candidate.
• Change the “cap_size" according to the ego of the candidate (or the size of your print bed).
• Export brim and cap separately (preferably in step format)
• The included step and stl files should fit someone with average to small head size
• Print the brim in flexible filament (e.g. TPU 95A)
• Print the cap with normal filament (preferably PETG)
• Screw in the M2 bolts into the holes in the brim, be careful not to screw too far
• Cut away the head of the bolts
• Insert the heat inset in the center hole
• Press the cap with the holes into the ends of the bolts, it should be strong enough without glue
• There is a cap test object, where you can test if everything fits
• Decorate according to the candidates subject!