Print-in-place resistor organizer

The resistor cabinet has 12 drawers, each with 5 compartments, of which 52 are pre-labeled with common values.   The dimensions are 240mm wide, 80mm deep, and 140mm high.  Each compartment holds at least 50 resistors on tape, probably 100 resistors loose.  The print-in-place organizers can be tie-wrapped together as shown in the last photo.

Ceramic capacitor organizer: https://www.printables.com/model/983369-print-in-place-ceramic-capacitor-organizer

Electrolytic capacitor organizer: https://www.printables.com/model/986897-print-in-place-electrolytic-capacitor-organizer

This is the resistor kit: https://www.amazon.es/-/pt/dp/B0B2CY3SW3/ or https://www.amazon.de/-/en/dp/B0B2CY3SW3

The cabinet & drawers print all at once.  Import resistor_cabinet.stl and resistor_cabinet_text.stl simultaneously into the slicer if you want colored text.  resistor_cabinet_no_labels.stl should be used if you want to make your own labels.

This model is based on my OpenSCAD model for parametric print-in-place drawers: https://makerworld.com/en/models/481479#profileId-397133