Foldable Christmas tree ornament

Christmas tree ornament which can be printed flat and mailed as a Christmas card to your dear ones inside a standard C5 envelope.
Can be printed both from PETG and PLA. PETG is more flexible and a little bit easier to assemble.
You can either print the parts separately (possibly using interesting colour combinations) or use the premade assembly with a supportive structure that is meant to be sent inside a C5 envelope.
This model was created in cooperation with panjan.

Assembly instruction:
1) break out all parts from the card

2) pull the two discs on the pole so, that the slope on the top one is directed down and outwards and the slope on the bottom one is directed up and outwards

3) twist the disc elements on the pole so they are locked in place (by 90 degrees)

4) insert one by one the middle elements to the slots on the upper and lower disc

5) hang on the Christmas tree using the upper ring

6) Enjoy!