stylish Fibonacci organizer/EDC tray, with optional Gridfinity base (v2)

Fibonacci Organizer

there are a few variations on this kind of design, but I wanted to make one that:

• is modular
  • you can make a nice color contrast and match it to your decor
  • you can change the inner boxes to fit your needs
• is compatible with, but not restricted to Gridfinity

for v2, I fixed a mistake that made the inner boxes the wrong dimension.  they still fit into the outer box, but only in one orientation.

if you need a different module

I'm not really sure how I'm going to use this, yet—I was mostly riffing on a visual idea—so I haven't made any other modules.

if there's something specific that you have in mind, let me know, and I'll give it a try if I have time.  alternatively, I'm including the STEP files, so that you can edit it yourself pretty easily.

if you come up with something you like, please post a remix!

I did add a pencil cup module, for the Back-to-School contest.

printing

for use in a gridfinity setup

• all three inner boxes—or variations
• the gridfinity outer box

for use outside a gridfinity setup

• all three inner boxes—or variations
• the flat outer box

for use in a gridfinity setup part time

• all three inner boxes—or variations
• the flat outer box
• the gridfinity tray

if your printer is reasonably accurate, fitting this should be no problem—there's a 0.1mm clearance around all the inner boxes—I know that this is overkill for some directions, but I didn't want to make them fit in only one way.

whatever print settings normally work for you should be fine; I normally use 3 walls, and gyroid infill at 5% or 15%.  no support/brim should be necessary for any of these files.

if there's interest, I'll clean up and post the Fusion 360 file.

I used the solid box as the base/tray for the outer box in this model