Andrea Doria Hull V.2

The main reason I made an updated hull is that the first one had an accident and broke, so I figured if I need to print a new one why not make it better.

I have made a shape that is more accurate to the original 

(not saying it is 100% accurate, because its not 😉)

Part 1 and 11 are the most tricky parts to print and I would suggest a layerheigt of 0,2 or less.

All other parts are OK with 0,3 if you use a 0,6 nozzel (saves a lot of time)

The “Aft-deck” can be printed, but I made it with plasticard!

The darker parts is not included here… they are a part of the superstructure in the link below.

The intended scale is about 1/144 and the files below will fit fine, but you may have to make sizeadjustment in your slicer for an accurate fit. (print a testpiece first)

A superstructure and details that fits is available on Thingiverse by other authors.

 Andrea Doria superstructure by Theidd - Thingiverse 

 Andrea Doria Details by LoneWolf-GER - Thingiverse

I used this propshaft for my build

Caldercraft Fine Line 7in Propshaft M4 Thread - Stainless Steel C4318 | Cornwall Model Boats