Z-Seam Test
This is a simple Z-Seam test. Just print with starting point next to X= 0 and Y = 0. So the Z-Seam will be in the…
13
473
2
1466
updated December 19, 2021
Description
PDFThis is a simple Z-Seam test.
Just print with starting point next to X= 0 and Y = 0. So the Z-Seam will be in the middle of the arc and you can play with the settings.
Print Settings
Printer:
Hypercube Evolution
Rafts:
No
Supports:No
Resolution:
0.2
Infill:10 %
Category: 3D Printing TestsTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
