I created this mounting system to be able to mount things to the outside of a Decathlon Quechua Airseconds tent. Examples are things like a Washing line, Tarp or even a Canopy.
The Distinctive feature about this design is that both parts are exactly the same in that there is no left or right part. You just print two (or more) of it and they will slot together perfectly fine.
The parts slide together and will be locked automatically by a lid in the first hole. To unlock you simply press the buttons within the first holes to unlock the lid and push the half’s apart.
The design has several mounting options with holes on the side and a hole on the front to accommodate as much scenario's as possible.
The design is made for our Quechua Airseconds Fresh&Black 6.3 tent, but I am sure it will fit other Quechua Airseconds models just fine. (Just not the Polycotton ones Since they have the beams inside)
Please note that I added some Fabric tape on the inside of the model to protect the Airbeams of the tent. (see the first picture)
If you are going to use this model I would really like to read about your findings and see your end results, so please take the time to write down your findings and upload your pictures ;).
And if you really really really love the model you are free to buy me a beer trough Patreon if you want ;)
Full disclosure, I already uploaded this model on the 11th of July which is 11 days to early to be able to attend the “Summer Camping” contest. Since it is only 11 days and I recon that this is a perfect fit for the contest I removed the old one and uploaded this with some extra pictures to be able to attend. If the contest organizers find this problematic feel free to rule me out.
Printer Brand:
Creality
Printer:
Ender 3
**Rafts:**
Yes
Supports:
Yes
**Resolution:**
0.2mm
Infill:
30%
**Filament:** JAYO PETG White
Notes:
Support for overhangs more than 85 degrees.
Print it flat in it's final orientation.
Do not use PLA on this one, It will deform right away because of the heat of the Sun.
Post-Printing =============
some minor support removal and sanding off the Brim. Stick some fabric tape on the inside of the mounts to protect the Airbeams of your tent.
Category: Sport & Outdoors
The author marked this model as their own original creation. Imported from Thingiverse.