Huawei P8 Lite Charging stand

Charging mobile stand designed to fit my Huawei P8 Lite and a random USB to Micro USB cable I had lying around.
0
20
0
306
updated November 9, 2019

Description

PDF

Charging mobile stand designed to fit my Huawei P8 Lite and a random USB to Micro USB cable I had lying around.

Warning: This stand is specific to the shape of the micro USB connector I used and is probably not genericat all. I'm mainly uploading it in hope to get advice on how to improve it as I'm totally new to 3D printing and modelling :)

Print instructions

Category: Mobile Phone Print Settings

Printer: CR-10 Mini

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 20%

Notes:

Just used my basic settings. Make sure to print each half in the appropriate orientation, no need for any support.

Post-Printing

Print each half, place the micro-USB end of the cable between them and snap them together. Optionally use some glue to secure them. That's it!

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License