Batman of Zur-En-Arrh Brick MegaFigure (5:1 Scale)

This is a set of pieces that can be used to recreate the Batman of Zur-En-Arrh figure originally published in 2014 at 500% scale.  This is a rare mini-fig that was exclusively available to attendees of the San Diego Comic-Con on July 26, 2014.

All the stl files needed to make this can be found in the "Stl Files" folder below.

For those with Bambu printers, there are Bambu project files located in the “Bambu Projects” folder to simplify things even further.  These file contain the parts in an ideal orientation for printing.  Parts that need painting have been painted in these files as well.  Note that you will need BambuStudio to open or work with these.

This minifig was remixed from the Brick Megafigure published by Julia Ebert.  The only changes made to the original design are:

• A modified torso which includes cavities to hold the torso sticker parts provided with this design (the sticker parts will need to be glued in place at these locations).
• All parts were scaled down 50% to work with other models we've published at a 5:1 scale from original Lego parts
• The waist parts were modified slightly to make them easier to assemble.
• At 50% scale, the pins were difficult to work with (and really not needed) so these were removed from the print list (Glue was still used to attach the connectors to their respective parts)
• Modified legs which include cavities to hold the leg sticker parts provided with this design (the sticker parts will need to be glued in place at these locations)

The basic instructions for assembling the figure can be found in Julia's post.  This is a fantastic model that's easy to print and assemble.  Special thanks to Julia for sharing this work!

All the accessory parts  were taken from thal72's Printables profile (or provided by thall72 directly) and scaled to 500%. He has a massive library of brick parts available at this location.  If you wish to do any additional customization to these mini-figures, this is a fantastic resource to find additional parts.  Special thanks to him as well for sharing this work!

If you decide to print this, we'd love to see it.  Please post pics of your makes, and please consider liking this design by clicking the "like" link above.

Happy Building!!

 - Scaled all figure parts down by 50%. Modified torso and legs to allow for decorative inserts.  Modified waist parts to make it easier to assemble at this scale.  

 - A subset of the models published by thall72 were organized and scaled up to work with the modified minifigure model.