Correcaminos Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150.06x106.29mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:
PLA Generic Recicled Black Transmission Distance: 0.6
PLA Generic Recicled Grey Dark Transmission Distance: 2
PLA Generic Recicled Orange Transmission Distance: 5
PLA Generic Recicled Yellow Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey Dark
At layer #12 (1.04mm) swap to Black
At layer #13 (1.12mm) swap to Orange
At layer #17 (1.44mm) swap to Yellow for the rest.