Sabvoton electronics cover

Model
To cover a sabvoton ebike controller, not meant to be waterproof and only meant to protect from dust and touching. (You can however use thick double sided foam tape and silicone sealant to weatherproof it).

The following parts are needed for assembly.

4x M3 threaded inserts
4x M3 8-12mm SHCS screws
6x 8G 12-16mm self tapping metal screws

Print Settings

Supports:

No supports needed

Resolution:

0.12mm - 0.24mm

Infill:

30%+

Perimeters:

Ideally 4x.

Filament: Anything with a GTC over 60c.