Vaporators (Lars homestead)

My simple version of a vaporator like the ones found at Lars homestead. Only parts that need supports are the out bits. There are 3 variations of section 3 that can be printed. Section 4 can only be used if option 1 was used for section 3. 

You should be aware these files are an absolute mess! I have got them all to slice in PrusaSlicer but can't say for others slicers. If you want to modify them you would probably be better to just start afresh.

This is part of a larger project where I built Lars homestead as a backdrop for photos of a Lego landspeeder. The other parts of the project can be found below:

Entry dome - https://www.prusaprinters.org/prints/98051-entry-dome-lars-homestead 

Workshop top - https://www.prusaprinters.org/prints/98118-workshop-top-lars-homestead 

Droids - https://www.prusaprinters.org/prints/98160-eg-6-and-wed-15-droids-lars-homestead 

Assorted props - https://www.prusaprinters.org/prints/98303-mixed-props-lars-homestead

The pit - https://www.prusaprinters.org/prints/98353-the-pit-lars-homestead 

Key ring - https://www.prusaprinters.org/prints/98203-stormtrooper-keyring

Project video -