PTFE Tube Guide for VIVO Steel Multi-Roll Filament Holder

This is is a guide for up to 6 PTFE tubes for the clamping VIVO Steel Filament Holder. I like this holder as it keeps the rolls out of the way, but the tubes were not managed well with this setup for me. I created this to guide the tubes a bit and keep them out of the way. 

It works pretty well with some left over M3 Bolts(35mm) and M3 square nuts pulled into the part. I also put two layers of electrical tape inside the “clamp” to give it to some grip on the pole. 

This should be sized well to fit on Mk3s/Mk4s without modification.