I am going to download and print this. Super excited. However, what does MFT mean and I am not sure how to use the locator if there is some insights that can be provided
@ColeFisher_1116509 MFT is a multi-function table. Developed initially by Festool, it has a grid of 20mm diameter holes on a 96mm pitch in both directions. Widely used to make accurate square cuts using a track saw and guide rail.
The locator is used to attach the guide rail to the MFT, using a track bolt in the T-slot on the guide rail. 2 locators are required.
I am going to download and print this. Super excited. However, what does MFT mean and I am not sure how to use the locator if there is some insights that can be provided
@ColeFisher_1116509 MFT is a multi-function table. Developed initially by Festool, it has a grid of 20mm diameter holes on a 96mm pitch in both directions. Widely used to make accurate square cuts using a track saw and guide rail.
The locator is used to attach the guide rail to the MFT, using a track bolt in the T-slot on the guide rail. 2 locators are required.