Festool Abrasive holder with positioning aid

Festool Abrasive holder with positioning aid - simplify your tool management 

Where do you currently store your abrasives? Print your own Festool abrasive holder with positioning aid and make your everyday work easier and more productive.

Don't have abrasives yet? Click here

Models

• The Small Model is made for ~20 abrasive discs
• The Big Model is made for a package of ~50 abrasive discs
• The Positioning Aid is made for up to 5 abrasive discs and is designed to hold the discs in the center down
• The Signs can be used for all models and can be changed
• There are two different files for the top holder. Either with a end cap or a model withouth the top pins. 

Printing

Please note that a good result can only be achieved by following our tested and verfified printing parameters.

• Material: PETG (recommendation); PLA (alternative)
• Layer Height: 0,2mm (recommendation)
• Orientation: On the Bottom
• Support: None 
• Infill: 20% (3D Honeycomb) 
• Dimensions: D90: 105mm x 88mm x 112mm; D125: 140mm x 88mm x 146mm; D150: 165mm x 88mm x 169mm

The Festool abrasive holder and positioning aid is designed for following abrasives

• Fits for all D90, D125, D150mm, DTS400/ RTS400 and RO90 V93/6 abrasives

Do you already know all Festool sanders?

Discover now

Since 1925, we have been developing power tools that meet the highest demands of professional craftspeople. It is your ideas and your criticism that inspire us to think of new, holistic product and system solutions that make your daily work easier, safer and more productive. The success of our customers is our greatest success - and the best praise. So we would be more than happy if you share your experiences, give us feedback and ask questions in the comments or via [email protected]

Become part of the Festool community and share your experience #myprintedfestool

Printables - https://www.printables.com/@Festool

Website - https://www.festool.com

YouTube - https://www.youtube.com/user/FestoolInternational

Facebook - https://www.facebook.com/Festool

Instagram - https://www.instagram.com/festool

Disclaimer

By downloading, the user declares that the 3D printing data provided will only be used in accordance with the specified printing parameters and at the user's own risk. Festool does not accept any liability for personal injury or damage to property resulting from the use of the provided printing data.