MMU3 Enclosure addon
Description
PDFDescription
All printable parts for upgrading your Original Prusa MMU3 for Enclosure instalation. Before you start printing, please read the instructions carefully.
Depending on the option selected, you either receive all printed parts from Prusa or you have to print them yourself. However, some parts requiring specific post-processing are included regardless, those aren't included in the G-codes (only as STLs).
This model includes parts for installing the hinged lid (which you can print separately here).
Fasteners and additional items needed for instalation
| Name | Pcs |
| Heatbed magnet 20x6x2 | 11 |
| PTFE tube 4x2,5x1100 | 5 |
| 3x20 Shaft | 2 |
| M3x8 screw | 7 |
| M3x10 screw | 5 |
| M3x6 screw | 3 |
| M3x20 screw | 16 |
| M3x12 screw | 11 |
| M3nN | 5 |
| M3n nut | 16 |
Print instructions
Before you start printing G-codes or individual parts, read the notes below each file.
Download the latest PrusaSlicer and use the following settings**:
- Print settings: 0.20mm QUALITY
- Filament: PETG (tested on Prusament)
- 20% Grid infill
** Note that print settings are recommended, but you can experiment with your own.
Tags
Model origin
The author marked this model as their own original creation.
