Flexi Holding Cat Combo Set (Print-in-place)

This is combo set that includes the "Flexi Holding Cat Mark-2 Set" and "Flexi Holding Calico Cat Set" (about 20% discount). Please refer to the links below for details on each product.
😸Flexi Holding Cat Mark-2
🐈Flexi Holding Calico Cat Set

This model includes the following digital content,
[Normal Eye]
- 01: STL - Regular
- 02: STL - Regular (Keychain)
- 03: STL - Long
- 04: STL - Long (Keychain)
- 05: 3mf (Bambu)- Cat Set
- 06: 3mf (Prusa)- Cat Set
[Cat Eye]
- 01: STL - Regular
- ...
- ...
- 06: 3mf (Prusa)- Cat Set
[Toon Eye]
- 01: STL - Regular
- ...
- ...
06: 3mf (Prusa)- Cat Set

Two types of files, plain and calico, composed as above, are included.
05 is 3mf files for multi-color that are compatible with Bambu Studio, and 06 is files for Prusa Slicer. Because of the large number of models, single 3mf file contains Regular, Long, and various keychain type models (4 models in total).  
*These 3mf files are only compatible with Bambu Lab, Prusa printers. Therefore, they are not compatible with other companies' dual-head printers.

Print in Place with no supports (Only stand needs to be assembled). Please take pictures of your Flexi and share them with us!

💰Commercial Use💰
This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the terms of use.
Ex) Sell 3D printed Flexi on Etsy, flea markets, etc.
For more information, please see the terms and conditions below.
https://cults3d.com/en/licenses#cults_cu_nd 
⚠Attention⚠
Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes. 
(Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)

⚠Warning⚠
Be careful in environments with young children and pets! 
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

🖨Setting🧵
Rafts:No
Supports:No
Bulid Plate Adhesion Type: Skirt or None
Layer Height: 0.1-0.3 mm
Infill:15-20%
Filament material: PLA

{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 10mm/s
Z Seam Alignment: User Specified
Z Seam Position: Right
Z Seam Corner Preference: Hide Seam

{Recommend: Bambu Lab Printer}
Layer Height: 0.2mm
Seam Position: Aligned
Wall Loops: 3
First layer: 30mm/s
Outer wall: 30mm/s
Prime Tower Width: 10mm
Prime Volume: 10mm^3
Prime Tower Brim Width: 0mm